Catalogue
WL-101
Analog, Low Profile Wheel Load Scale

Class 4 / NIST approved
Range: 0....10 t (0....20,000 lbs)
Active weighing area: 37.5 x 65.5 cm (25.7 x 14.7")
Platform Heights: 16 mm (0.67")
Weight: 17 kg (37 lbs.)
WL-103
Digital, Low Profile Wheel Load Scale

Class 4 / NIST approved
Range: 0....10 t (0....20,000 lbs)
Active weighing area: 37.5 x 65.5 cm (25.7 x 14.7")
Platform Height: 17 mm (0.67")
Weight: 17 kg (37.7 lbs)
Operating time: 60 hrs. on 6 D-cell NiCad batteries
Computer interfacing capability
WL-103 XL
Digital, Low Profile Wheel Load Scale

All eight wheels are placed on two scales no higher then 17mm (0.67"). A nightmare to weigh this trailer! - No more, two WL-103XLs will measure axle by axle and provide you with a detailed print-out.

Class 4 / NIST apporved
Range: 0....10 t (0....20,000 lbs)
Active weighing area: 139.4 x 38.3cm (55.0 x 14.7")
Platform Height: 17 mm (0.67")
Weight: 29 kg (65 lbs)
Operating time: 60 hrs. on 6 D-cell NiCad batteries
Computer interfacing capability
WL-103 & EC200 software
A complete mobile weighing system

An ideal portable weighing system to set-up within minutes anywhere. A user friendly application software can be installed on any laptop computer and linked through a special cable with two low profile wheel load scales WL-103. The user friendly Windows compatible software monitors the incoming weights, tabulates the same and prints a detailed report. Levelling mats are recommended to equalize all axles to the platform heights, avoiding any kind of measuring errors. A optional portable printer can be supplied to print a detailed weight on location.
WL-104
Static/Dynamic Wheel Load Scale

Static weighing and weighing in motion up to 20 km/h of wheel and axle loads of vehicles with pneumatic tires (LS-WIM).Two or more scales may be lined up to a seamless weighing strip.
Low Speed Weigh in Motion
LSWIM, yes it's here and it works!

Simply the best there is !
Yes, you've tried them all .... seen it all and now there is life thereafter. HAENNI has done it again! Low speed weigh in motion with an accuracy of better than 5%.
EC-100 Processing Unit
Selfcontained Processing unit with Printer

Portable Data Processing unit providing immediate print-out of wheel-, axle- and vehicle weight. Operates on 12VDC or 115VAC (Battery operated model available)

Design and Function:
The processing unit EC-100 is continuously receiving the weights of the connected scales and is charging their internal batteries at the same time.

Accessories:  
Installation racks
You asked for it .... here it is!

Special inground racks to level the scales with the road's surface have been designed for semi-permanent installations. Slide the WL-103 scales into the rack and you're operational in five minutes flat!
Leveling Mats
Short & Long Leveling Mat

Mats to equalize axles not measured at any given time.
Two length available: 0.4m and 2.8m